Q. How do I level my RV using the RV Level?

A. Leveling is a snap: 

  1. Power on the Command Center tablet and hub.
  2. Unplug the USB cable from the hub and place it on a flat floor surface in the middle of the RV
  3. Point the triangle "F" towards the front of the RV.
  4. The RV Level app will give instructions on which side of the RV needs to be raise until the RV is level on all four sides.
  5. Boom! You're a genius!

(Note: If the jacks are fully extended, but the RV still isn't level, start over by retracting all jacks and repeat the leveling process above.)




Q. Do I need to calibrate my RV Level?

A. No. The Command Center hub is calibrated at the factory. Only calibrate if instructed by an RVi tech support.


Q. Does the Command Center hub have to be plugged in to level my RV?

A. No. The Command Center hub has an internal battery to allow for leveling.