Q. What if I only want the RVibrake1 or 2 to perform during panic stops and breakaways? A. No problem. Just choose the SENSITIVITY setting of LOW. Here's how the sensitivity works:
LOW: RVi1 or 2 will only perform in a panic stop. In this type of braking you definitely don't have time to look at the monitor.
MED: RVi1 or 2 will only perform in a hard stop. In this type of braking you probably don't have time to look at the monitor.
HIGH: RVi1 or 2 will perform 60-70% of the time you put your foot on the brake pedal in the motorhome. The rule of thumb in HIGH is, if you feel your chest getting gently pulled forward in a braking then the RVi1 or 2 will brake. The harder you feel your chest getting pulled forward the bigger the graph will grow.
Q. How do I know RVibrake is working? A. RVibrake1 and 2's wireless monitor gives you complete, continuous braking information — a glance at the monitor assures you that RVibrake is fully operational.
(Note: if the wireless monitor is not plugged in, RVibrake will still continue to work.)