Q. How long will it take for the Tire Pressure Sensors to initially pair with the RVibrake2?

A. Initial pairing usually take around 2 minutes, but can take as long as 10 minutes.



 

Q. Will the sensors re-connect with the RVibrake2 if I unplug the RVibrake2 for the night or it loses power?

A. Yes! After you plug the RVibrake2 in and run it through the Auto Position start cycle, then the Sensors will begin to re-connect with the RVibrake2. Re-connection is usually established within 7 minutes, but can take as long as 10 minutes.


(NOTE: While the sensors are re-connecting with the RVibrake2, the Wireless Monitor will read "11, 12, 13, 14" (or "99", "99", "99", "99") by default on the screen. As each sensor re-connects, it's pressure will appear on the screen.)

 

Q. Will the sensors re-connect with the RVibrake2 if I unthread the sensors from the valve stems and re-thread them on?

A. Yes. Before you thread the sensors back on you'll need to make sure the RVibrake2 is plugged in and has been run through the Auto-Position cycle and the LEDs on the RVibrake2 are solid.

 

Q. How many tires can I monitor at once with the Tire Pressure Sensors for RVibrake2?

A. 4. The four sensors are designed specifically for the towed vehicle. However, some customers use two sensors on the front tires of the coach and two sensors on the front tires of the towed vehicle.